类型:通信IC | 电源电压:-55 至 125 | 频率:100HZ |
用途:*** | 品牌:XILINX/赛灵思 | 型号:XCVU9P-1FLGA2577E |
封装:法兰封装 | 功率:16W | 特色服务:通信 |
批号:16+ |
XCVU9P-1FLGA2577E 单价高 货期长如有需求联系国宇航芯黄小姐13632767652 |
XCVU9P-1FLGA2577E 描述 IC FPGA VIRTEX-UP 2577FCBGA |
Summary The Xilinx? Virtex? UltraScale+? FPGAs are available in -3, -2, -1 speed grades, with -3E devices having the highest performance. The -2LE devices can operate at a VCCINT voltage at 0.85V or 0.72V and provide lower maximum s|-?c power. When operated at VCCINT = 0.85V, using -2LE devices, the speed sr;cbCc-?on for the L devices is the same as the -2I speed grade. When operated at VCCINT = 0.72V, the -2LE performance and s|-?c and dynamic power is reduced. DC and AC c_-r-c|;rbs?cs are sr;cbC;7 in extended (E) and industrial (I) temperature ranges. Except the or;r-?n] temperature range or unless otherwise noted, all the DC and AC electrical parameters are the same for a r-r?c??-r speed grade (that is, the ?mbn] c_-r-c|;rbs?cs of a -1 speed grade extended device are the same as for a -1 speed grade industrial device). However, only selected speed grades and/or devices are available in each temperature range. All supply voltage and f?nc?on temperature sr;cbCc-?ons are r;rr;s;n|-?v; of worst-case con7b?ons? The parameters included are common to popular designs and typical -rr?bc-?ons?
XCVU9P-1FLGA2577E |
总结
Xilinx Virtex UltraScale +???FPGA可在- 3、- 2、- 1的速度等级,以3E器件具有
性能。- 2le设备可以工作在一个电压0.85V低或0.72v VCCINT提供低
的| -?C。在VCCINT = 0.85v操作时,使用2le设备,速度SR;CBCC为?上
l设备为?我速度等级相同。在VCCINT = 0.72v操作时,该2le性能的| -?C
动态功耗降低。
直流和交流c_ - R-C |;RBS?铯锶;CBC;7扩展(E)和工业(我)温度范围。除了
或;R?n ]温度范围或除非另有说明,所有的直流和交流电气参数相同
对于一个R-R?C??- R的速度等级(即的?MBN ] c_ - R-C |;RBS?CS一1速度等级扩展设备都是一样的
对于A - 1速级工业设备)。但是,只有选定的速度等级和/或设备可用。
每个温度范围。
所有的电源电压和温度?数控?SR;CBCC -?项R;RR;S;N | -?V;最坏的con7b?ONS?
参数包括流行的设计和典型的常见的RR?公元前?ONS?